Filter
Top Products
5-6
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Managing Trunk Groups and Trunks
Testing trunks
(place in MAINT state first)
SS7 trunks
diag ss7-trunk-termination tgn-id=103; cic=13; test=1;
Test 1: SS7 MGCP Connectivity Test—tests if MGCP has access to
the SS7 trunk termination
Test 2: SS7 Termination Connection Test—tests if there is a path to the
device (ping).
Test 3: SS7 COT Test—tests the integrity of the SS7 Bearer Path.
Test 4: SS7 CQM Test—queries the SS7 circuit (or group of circuits)
status. A range of CICs can be specified (to a maximum of 24). Both
remote and local trunk states are displayed in the results.
Test 5: SS7 CVT Test—tests to ensure that each end of the circuit has
sufficient and consistent information for using the circuit in call
connections. CLLI names are included.
Test 6: SS7 CIC Audit—returns status of CICs
Test 0: ALL—performs tests 1 through 6.
ISDN trunks
diag isdn-trunk-termination test=1; tgn-id=17; cic=1;
1. Tests if MGCP has access to the ISDN termination
2. Tests if there is a path to the device (ping)
3. Performs tests 1 and 2
CAS trunks
diag cas-trunk-termination tgn-id=64;cic=1;test=1;
1. Tests if MGCP has access to the CAS termination
2. Tests if there is a path to the device (ping)
3. Performs tests 1 and 2
Announcement trunks
diag annc-trunk-termination;test=1;tgn-id=13;cic=1
1. Tests if MGCP has access to the ANC termination
2. Tests if there is a path to the device (ping)
3. Performs tests 1 and 2
Table 5-3 Valid Normal Trunk Termination States
State/Token ADMIN-STATE OPER-STATE STATIC-STATE DYNAMIC-STATE
UNEQP UNEQP ANY UEQP IDLE
MANUALLY OOS OOS ANY LBLK IDLE
MANUALLY MAIN MAINT IDLE LBLK IDLE
Table 5-2 Managing Trunk Groups (continued)
Task Sample Command