Cisco Systems 10200 Telephone User Manual


 
5-8
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Managing Trunk Groups and Trunks
any Failure Found no failure
TG(s) cannot be found, trunk(s) cannot be found, no TG(s) found in
trunking gateway, no trunk(s) found in TG
Fail while in termination table, fail while in TG table, fail while in
trunk table, fail while looking to find trunk index, fail while getting
TG administration state
Failed to allocate IPC message(s), failed to dispatch IPC message(s)
Operational state invalid, administration state invalid
Trunk(s) state change and pending
Found TG type invalid, found TG state invalid, found TG admin state
not ready
Entity in desired state
Not allow trunk to reset
Change to out-of-service state required, change to request graceful
mode error
Found entity unequipped in initial state
Operation not allowed because D Channel(s) is down
Found unknown failure reason(s)
Table 5-4 Understanding Trunk Group and Trunk Generic Command Responses (continued)
Command
Entered
Command
Response Possible Conditions