Filter
Top Products
5-10
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Managing Trunk Groups and Trunks
Trunk
commands
Failure • NON-FAULTY—Not blocked, available for service.
• MAINT-OOS—Trunk-termination is manually controlled OOS.
• MAINT-BUSY—Trunk-termination is in maintenance state;
controlled to MAINT.
• TERM-FAULT—Bearer termination is in faulty condition.
• SIGNALLING-FAULT—Signaling link (for example, SS7 link, or
ISDN D channel) is faulty.
• MAINT-BLOCK—Trunk-termination is manually controlled OOS
(controlled mode=GRACE).
• HARDWARE-BLOCK—Trunk-termination is manually controlled
OOS (controlled mode=FORCED).
• OUTGOING_RESTRICTED—The outgoing call is not allowed
• DPC_INACCESSIBLE—The DPC is not accessible.
• ACL_CONGESTION_LEVEL_1—Automatic Congestion Level
(ACL) congestion is at level 1.
• ACL_CONGESTION_LEVEL_2—ACL congestion is at level 2.
• ACL_CONGESTION_LEVEL_3—ACL congestion is at level 2.
• TFC_CONGESTION_LEVEL_1—Transfer Controlled (TFC)
congestion is at level 1.
• TFC_CONGESTION_LEVEL_2—TFC congestion is at level 2.
• TFC_CONGESTION_LEVEL_3—TFC congestion is at level 3.
Table 5-4 Understanding Trunk Group and Trunk Generic Command Responses (continued)
Command
Entered
Command
Response Possible Conditions