Filter
Top Products
MT8850A / MT8852A Bluetooth Test Set Using the Script Menu
Setting Up General Script Parameters
1. Press the hard key.
The Script menu is displayed.
2. Move the cursor to the Script number.
3. Press the
[Setup] soft key.
The Script setup screens are displayed.
4. Specify the script mode.
Press the
key to toggle the script mode setting between “Standard”, “Null
Packet”, and “Single Payload”.
5. Enter the “TX power level” value using the keypad.
You can set the transmission power level to between 0 and -90 dBm. TX power level
sets RF power of the MT8850A/MT8852A transmitter. This power level is used for link
setup and all measurement with the exception of EUT receiver sensitivity and
maximum input power.
8-6 13000-000109
Setting Up General Script Parameters June 2003