Anritsu MT8852A Bluetooth Headset User Manual


 
13000-000109 B-1
June 2003
Appendix B. Preset Values
Link status Will perform disconnect, if connected
Script QUICKTEST
Script mode Standard
Modulation index 0.32
Range hold Auto
EUT address source Inquiry
Path offset Not changed
Script set up conditions Not changed
Test set up conditions Not changed
Test pause On
TX power level Not changed
Signal generator mode OFF
Inquiry set up 1 response
20 seconds
Common name = ON
EUT RS232 set up Baud rate = 57600
Parity = None
Data length = 8 bits
Stop bits = 1 bit
GPIB address Not changed
RS232 baud rate Not changed
RS232 mode EXT COMMS
Display Contrast = 5
Key click = ON
Entry error beep = OFF
Channel pattern Standard (72 channels)
Loop stop on test fail OFF
Loop continuously ON
Loop count Continuous
Display frequency as MHz
Inquiry scan OFF
Errata 1158 ON
Payload pkt count Transmitted
Link timeout 10 seconds
Set EUT max pwr on connection ON
End paging after 10 seconds
Read EUT name on connection OFF
Authentication Disabled