Filter
Top Products
MT8850A / MT8852A Bluetooth Test Set Installation
Environmental Requirements
The MT8850A/MT8852A is designed to operate within the temperature range of 5 to 40° C
(41 to 104° F) with a maximum humidity of 90% at 40° C (104° F), non-condensing. Full
accuracy is specified at 5 to 35° C (23 to 95° F).
Although not recommended, operation in temperatures to –20°C
(–4° F) is possible. At these temperatures, however, the liquid crystal display may exhibit
excessively slow response.
CAUTION
The instrument is cooled by a fan at the rear, which circulates air
round the instrument through the vent holes in the base. The fan and
the vent holes should not be blocked.
Rack Mounting
The MT8850A/MT8852A Bluetooth Test Set can be ordered with rack mounting hardware
that allows the instrument to be mounted into a standard 19-inch equipment rack. There
are two rack mount option kits available:
The MT8850A-01 Rack Mount option allows the installation of a single
MT8850A/MT8852A in either the left or right side rack position.
The MT8850A-03 Rack Mount option allows side-by-side mounting of two
MT8850A/MT8852A Test Sets.
Single Unit Rack Mounting (Option 01)
This section describes the assembly procedure for fitting a single MT8850A/MT8852A
Bluetooth Test Set into an instrument rack. The MT8850A/MT8852A universal top and
bottom covers have removable feet to allow the rack mount kit to be fitted. The procedure
involves fitting the support bracket, front plate, base panel, and a rear support bracket to
the MT8852A. The MT8850A/MT8852A can then be loaded and secured in the rack
position.
Kits Parts List
Anritsu No. Description Quantity Max Torque
Setting
50077 Front face plate 1.0
900-848 M4, kep nut. 2.0 14 lbf.in [158
cNm]
790-319 Speed nut 4.0
900-345 #4, sst, washer, flat 8.0
900-821 Decorative screw 4.0
905-68 M3x8, pos, sst, patchlock,
screw, metric, pan head.
8.0 4 lbf.in [45 cNm]
788-575 Snap rivet, plastic 6.0
C37276 Rack mount, side, bracket 1.0
C41449 Rear support, bracket, rack
t
1.0
3-2 13000-000109
Environmental Requirements June 2003