Filter
Top Products
Chapter 8. Using the Script Menu
Introduction
The sequence of tests that is run is determined by one of 10 possible scripts, which define
the tests to be run.
Scripts 1 and 2 are preconfigured and the tests cannot be altered. Scripts 3 to 10 are
unlocked by default but can be locked and password protected. If you attempt to change
parameters for a locked script, a warning message is displayed.
The scripted tests are set up and run from menu entries accessed by pressing the
hard key. You can use entries in this menu to view the address and user
friendly name for the EUT and display results of tests.
There are eight tests defined and the procedures for configuring the test, running the test
and obtaining the results are described for each test.
The script menu provides access to configuring, running single tests and obtaining the
results for each test as well as checking the address of the EUT.
13000-000109 8-1
June 2003 Introduction