Filter
Top Products
13000-000109 C-1
June 2003
Appendix C. Specification
This appendix provides the specification for the MT8850A/MT8852A Bluetooth Test Set.
Transmitter Tests
Test Measurement Range Hop-
ping
Test
Mode
Loopback
(Or TX)
Pay-load Packets Measurement Control
Output
Power
Average power
+ 22 dBm to -35 dBm
Peak power
+ 23 dBm to -35 dBm
OFF
and/or
ON
ON Loopback PRBS 9 Longest
Supported
To Qualification specification
or user set;
Low/Mid/High frequencies
Number of returned packets
Power
Control
Average power
+22 dBm to -35 dBm
Power steps
measured
OFF ON Loopback PRBS 9 DH 1 To Qualification specification
or user set;
Low/Mid/High frequencies
Number of returned packets
Modulation
Characteristi
cs
0 kHz to 350 kHz OFF ON TX mode or
loopback
10101010
and
11110000
Longest
Supported
To Qualification specification
or user set;
Low/Mid/High frequencies
Number of returned packets
Initial
Frequency
±1 kHz to ±150 kHz OFF
and/or
ON
ON TX mode or
loopback
PRBS 9 DH 1 To Qualification specification
or user set;
Low/Mid/High frequencies
Number of returned packets
Frequency
Drift
DH 1/3/5 packets
0 kHz to 200 kHz
>20000 Hz/50µs
OFF
and/or
ON
ON TX mode or
loopback
1010.... All
supported
packet
lengths
To Qualification specification
Hopping On/Off, or user set;
Low/Mid/High frequencies
Number of returned packets
Receiver Tests
Test Measurement Range Hop-
ping
Test-
Mode
Loopback
(Or TX)
Payload Packets Measurement Control
Sensitivity
Single slot
Dirty
transmitter
BER 0.000% to 100%
FER 0.000% to 100%
OFF
and/or
ON
ON Loopback PRBS 9 DH 1 To Qualification specification
or user set;
Low/Mid/High frequencies
Number of returned packets
Sensitivity
Single slot
Clean
transmitter
BER 0.000% to 100%
FER 0.000% to 100%
OFF
and/or
ON
ON Loopback PRBS 9 DH 1 To Qualification specification
or user set;
Low/Mid/High frequencies
Number of returned packets
Sensitivity
Multi slot
Dirty
transmitter
BER 0.000% to 100%
FER 0.000% to 100%
OFF
and/or
ON
ON Loopback PRBS 9 DH 5
(or DH3 if
DH5 not
supported)
To Qualification specification
or user set;
Low/Mid/High frequencies
Number of returned packets
Sensitivity
Multi slot
Clean
transmitter
BER 0.000% to 100%
FER 0.000% to 100%
OFF
and/or
ON
ON Loopback PRBS 9 DH 5
(or DH3 if
DH5 not
supported)
To Qualification specification
or user set;
Low/Mid/High frequencies
Number of returned packets
Max. Input BER 0.000% to 100%
FER 0.000% to 100%
OFF ON Loopback PRBS 9 DH 1 To Qualification specification
Hopping On/Off, or user set;
Low/Mid/High frequencies
Number of returned packets