Filter
Top Products
94 - 165 IP Telephony v1.0 Lab 5.1.5 Copyright © 2005, Cisco Systems, Inc.
Lab 5.1.5 Configuring Call Park
Objective
• Configure the Call Park option
Equipment Requirements
• Cisco CallManager Express (CME) capable router
• Inline power capable switch or non-inline power switch with power injectors
• Workstation with an Ethernet 10/100 NIC installed
• Two Cisco IP phones
• One analog phone
This lab relies on labs 2.1.1, 2.1.2, 3.1.1, 4.1.1, and 5.1.1 being successfully completed and loaded.
In this lab the ACME.com Company has an overhead page that is used by the company operator to
page someone that is not answering a transferred consultative call. The ability to park the call will be
needed so the person being paged can retrieve the call from any phone in the CallManager Express
system.