Filter
Top Products
9 - 165 IP Telephony v1.0 Lab 2.1.1b Copyright © 2005, Cisco Systems, Inc.
Lab 2.1.1b Basic Setup for the CME Router and Switch
Objectives
• Configure a Cisco router in preparation for CallManager Express (CME)
• Identify the DHCP configuration commands
• Configure a switch in preparation for CME
Equipment Requirements
• Cisco CallManager Express (CME) capable router
• Inline Power capable switch or non-inline power switch with power injectors
• Workstation with an Ethernet 10/100 NIC installed
In this lab, the ACME.com Company has decided to deploy CallManager Express in the enterprise.
First, the router portion of CallManager Express must be configured. The routers and switches
should be configured using the information found in IP Telephony Table 1.
Step 1 Assign a Pod Number
a. Ask the instructor to assign a pod number to the lab group.
What pod number was the group assigned? ____________________