Filter
Top Products
111 - 165 IP Telephony v1.0 Lab 5.1.9 Copyright © 2005, Cisco Systems, Inc.
Lab 5.1.9 Configure Paging Groups
Objective
• Set up two paging groups. Each IP phone will be in a different paging group, and both paging
groups will belong to yet another paging group.
Equipment Requirements
• Cisco CallManager Express (CME) capable router
• Inline power capable switch or non-inline power switch with power injectors
• Workstation with an Ethernet 10/100 NIC installed
• Two Cisco IP phones
• One analog phone
This lab relies on labs 2.1.1, 2.1.2, 3.1.1, and 4.1.1 being successfully completed and access to IP
Telephony Tables 1 and 2.
In this lab the ACME.com Company wishes to configure paging groups that will use the speaker
feature of the IP phones. A paging group for the sales staff and a paging group for the technical
support staff are required. In addition, when an emergency page is needed, all phones in the sales
paging group and all phones in the tech support group should receive the emergency page.