Filter
Top Products
117 - 165 IP Telephony v1.0 Lab 7.1.1 Copyright © 2005, Cisco Systems, Inc.
Lab 7.1.1 Configuring AutoQoS
Objective
• Enable the AutoQoS for VoIP feature on workgroup router interfaces
Equipment Requirements
• Two Cisco CallManager Express (CME) capable routers (each with a serial and PRI port
configured)
• Two inline power capable switches or non-inline power switches with power injectors
• Adtran
• Two IP phones
This lab relies on labs 2.1.1, 2.1.2, 2.1.4, 3.1.1, 4.1.3, and 4.1.4 being successfully completed and
loaded.
In this lab ACME.com wishes to implement AutoQoS for the VoIP network. The network support
staffs are not very skilled in QoS, but they do know that Cisco has a command that will implement
Cisco’s “best guess” for QoS based on the router configuration currently implemented.