24 - 165 IP Telephony v1.0 Lab 2.1.3 Copyright © 2005, Cisco Systems, Inc.
Lab 2.1.3 Connecting the IP Phone to a Switch
Objective
• Connect an IP phone to a switch and provide power to it
Equipment Requirements
• Inline power capable switch or non-inline power switch with power injectors
• Two Cisco IP phones
This lab relies on labs 2.1.1 being successfully completed and loaded.
In this lab the ACME.com Company wishes to implement IP telephony. In order to do so, the phones
must receive power in order to work.
• Cable the two IP phones to a switch
• Provide power to the phones using one or both methods