Filter
Top Products
8 - 165 IP Telephony v1.0 Lab 2.1.1a Copyright © 2005, Cisco Systems, Inc.
Answers to 2.1.1a lab
1a. The pod number depends on what the instructor assigned.
3m.
10.X0.0.1 (Pod1 is 10.1.0.1; Pod2 is 10.2.0.1, etc.)
4b. Depends on the router being used
4d. Usually this answer will be something similar to the following: FastEthernet 0/0/0, 0/0/1, 0/0/2,
and 0/0/3 OR FastEthernet 1/0/0, 1/0/1, 1/0/2, and 1/0/3.
4f. DOT1Q is the parameter that specifies the IEEE 802.1Q trunking protocol to be used on the
subinterface. The 802.1Q trunking protocol is the most commonly used trunking protocol. The
alternative is ISL. Note many switches do not have both trunking protocols.
5b. Yes
5d. Enabled
5e. trunk
5f. trunk
5g. dot1q
5h. all of the VLANs
5j. The answer depends on the slot number into which the switch module inserts, but an example
is Fa0/0/0 and Fa0/0/1.
5k. VLAN X0 (where X is the pod number)
5l. 1-1005 (all of them)
5m. VLANs 1, X0, and X5 (where X is the pod number)