Filter
Top Products
2 - 165 IP Telephony v1.0 Lab 2.1.1a Copyright © 2005, Cisco Systems, Inc.
Lab 2.1.1a Basic Setup for the CME Router with Switch Module
Objectives
• Configure a Cisco router in preparation for CallManager Express (CME)
• Configure a switch in preparation for CME
Equipment Requirements
• Cisco CallManager Express (CME) capable router with switch module
• Workstation with an Ethernet 10/100 NIC installed
• Two Cisco IP phones
In this lab, the ACME.com Company has decided to deploy CallManager Express in the enterprise.
First, the router portion (including the switch module) of CallManager Express must be configured.
The routers and switch module should be configured using the information found in IP Telephony
Table 1.