Filter
Top Products
55 - 165 IP Telephony v1.0 Lab 4.1.2 Copyright © 2005, Cisco Systems, Inc.
Lab 4.1.2 Configuring a FXO Port
Objective
• Configure a router FXO port for an analog phone
Equipment Requirements
• Cisco CallManager Express (CME) capable router with a FXO port
• Inline power capable switch or non-inline power switch with power injectors
• Adtran
• Two IP phones
• Two analog phones
This lab relies on labs 2.1.1, 2.1.2, 3.1.1, and 4.1.1 being successfully completed and loaded.
In this lab the ACME.com Company has configured the IP phones and now wishes to configure the
analog connection to the PSTN. This lab will allow an outbound call only.