Filter
Top Products
39 - 165 IP Telephony v1.0 Lab 3.1.2 Copyright © 2005, Cisco Systems, Inc.
Lab 3.1.2 CME Manual Phone Setup
Objective
• Configure IP Phones using the manual configuration process
Equipment Requirements
• Cisco CallManager Express (CME) capable router with specific files for IP phone (basic CME .tar
file)
• Inline power capable switch or non-inline power switch with power injectors
• Workstation with an Ethernet 10/100 NIC installed
• One Cisco IP phone
In this lab the ACME.com Company has decided to use the manual setup process to configure the
Cisco CallManager Express router and phones. Use IOS commands to achieve the following goals:
• Manually configure the IP phones with an extension and connect them to the network
• Assign a name to the IP phones
This lab relies on labs 2.1.1, 2.1.2, and 2.1.3 being successfully completed. The lab uses information
referenced in IP Telephony Table 1 and IP Telephony Table 2.