Filter
Top Products
57 - 165 IP Telephony v1.0 Lab 4.1.2 Copyright © 2005, Cisco Systems, Inc.
f. From the analog phone attached to router FXS port, dial the number associated with the analog
phone attached to the Adtran. The phone numbers used on the Adtran Octal FXS ports are as
follows: port 1 phone number is 555-6001; port 2 is 555-6002; port 3 is 555-6003, etc. The
analog phone connected directly to the Adtran port should ring.
g. Does the called analog phone ring? If not, perform appropriate troubleshooting before
proceeding. ____________
h. From enable mode on the router, debug the dial peer information.
CMERouterX# debug voice dialpeer all
i. While viewing the debug output, list the line that proves that the dial peer works correctly.
_______________________________________________________________________
j. Turn the debugging off.
CMERouterX# undebug all
k. Test the configuration by calling from an IP Phone to the analog phone attached directly to the
Adtran.
l. Did the call work? If not, perform appropriate troubleshooting before proceeding. ___________