Filter
Top Products
73 - 165 IP Telephony v1.0 Lab 4.1.5 Copyright © 2005, Cisco Systems, Inc.
m. Type exit to go to global configuration mode. Define a COR list by using the command dial-peer
cor list Type1.
CMERouterX(config)# dial-peer cor list Type1
n. Put a member in the COR list with the command member WAN.
CMERouterX(config-dp-corlist)# member WAN
o. Type exit to go to global configuration mode. Define a COR list by using the command dial-peer
cor list Type2.
CMERouterX(config)# dial-peer cor list Type2
p. Put the first of two members in the COR list with the command member WAN.
CMERouterX(config-dp-corlist)# member WAN
Put the second of two members in the COR list with the command member Analog.
CMERouterX(config-dp-corlist)# member Analog
q. Type exit to go to global configuration mode.
Step 2 Apply Class of Restriction to a Dial Peer
a. Enter dial-peer voice 2 pots to enter dial peer configuration mode.
CMERouterX(config)# dial-peer voice 2 pots
b. Assign an outbound COR list to the dial peer with the command corlist outgoing callAnalog.
CMERouterX(config-dial-peer)# corlist outgoing callAnalog
c. Without making a phone call, what phone calls do you expect to work and what phone calls do
you expect to not work? _______________________________________________________
___________________________________________________________________________
d. Type exit to go to global configuration mode. Enter dial-peer voice 3 pots to enter dial peer
configuration mode.
CMERouterX(config)# dial-peer voice 3 pots
e. Assign an outbound COR list to the dial peer with the command corlist outgoing callPRI.
CMERouterX(config-dial-peer)# corlist outgoing callPRI
f. Type exit to go to global configuration mode. Enter dial-peer voice 6 voip to enter dial peer
configuration mode.
CMERouterX(config)# dial-peer voice 6 voip
g. Assign an outbound COR list to the dial peer with the command corlist outgoing callWAN.
CMERouterX(config-dial-peer)# corlist outgoing callWAN
h. Type exit to go to global configuration mode. Enter ephone directory number mode by entering
the command ephone-dn 1.
CMERouterX(config)# ephone-dn 1