Filter
Top Products
3-9
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Chapter 3 Installing the Cisco IP Phone
Verifying the Phone Startup Process
Figure 3-3 Parts Used in Wall Mounting the Cisco IP Phone
Verifying the Phone Startup Process
After the Cisco IP Phone has power connected to it, the phone begins its startup
process by cycling through these steps:
1. These buttons flash on and off in sequence:
–
Headset (on Cisco IP Phone models 7960 and 7940 only)
–
Mute
–
Speaker
2. The LCD screen displays the Cisco Systems, Inc., copyright screen.
1 Footstand adjustment knob—Raises and lowers adjustment plate
2 Wall mounting screw holes
3 Adjustment plate—Raises and lowers phone vertically
1
2
2
3
63274