About This Guide
Objectives
x
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Objectives
This guide provides the required steps to get the Cisco IP Phone up and running
on a Voice-over-IP (VoIP) network. Because of the complexity of an IP telephony
network, this guide does not provide complete and detailed information for
procedures that you need to perform on the Cisco CallManager application or
other network devices.
Organization
Table 1 provides an overview of the organization of this guide.
Table 1 Cisco IP Phone Administration Guide Organization
Chapter Description
Chapter 1, “An Overview of the Cisco IP Phone” Provides a conceptual overview and description of
the Cisco IP Phone.
Chapter 2, “Preparing to Install the
Cisco IP Phone on Your Network”
Describes how the IP Phone interacts with other
key IP telephony components, and provides an
overview of the tasks required prior to installation.
Chapter 3, “Installing the Cisco IP Phone” Describes how to properly and safely install and
configure the Cisco IP Phone on your network.
Chapter 4, “Installing the
7914 Expansion Module”
Describes how to install and connect one or two
Cisco IP Phone 7914 Expansion Modules on the
Cisco IP Phone 7960.
Chapter 5, “Configuring Network Settings on the
Cisco IP Phone”
Describes how to configure network settings,
verify status, and make global changes to the
Cisco IP Phone.
Chapter 6, “Configuring Cisco IP Phones, Users,
and Features in Cisco CallManager”
Provides an overview of procedures for adding
users to the network, configuring corporate
directories, and setting up web information
services.
Chapter 7, “Troubleshooting the Cisco IP Phone” Provides tips for troubleshooting the
Cisco IP Phones and the Expansion Module.