Filter
Top Products
Chapter 6 Configuring Cisco IP Phones, Users, and Features in Cisco CallManager
Configuring Cisco IP Phones in Cisco CallManager
6-2
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Configuring Cisco IP Phones in Cisco CallManager
After you add Cisco IP Phones to Cisco CallManager, you can add additional
functionality to them.
Table 6-1 includes a list of the supported telephony features and tips about how to
configure them using Cisco CallManager. For additional details, refer to the
Cisco CallManager Administration Guide, the Cisco CallManager System Guide,
Cisco CallManager Extended Services Administrator's Guide or context-sensitive
help in the application.
Table 6-1 Configuring Telephony Features Using Cisco CallManager
Feature Description Configuration Tips
Auto answer Forces the speakerphone or headset to
go off hook automatically when an
incoming call is received
From Cisco CallManager, choose:
Device > Phone and select the
directory number to configure.
Using Cisco CallManager, you can
enable this feature for either the
headset or speakerphone.
Barge Allows user to initiate joining an
in-progress call on a shared line.
From Cisco CallManager, choose:
Service > System Parameters and
enable the BargeEnabled service
parameter.
Call park Places the call on hold so anyone
connected to the Cisco CallManager
system can retrieve it
From Cisco CallManager, choose:
Feature > Call Park to configure.
Call pickup Picks up incoming calls within a group From Cisco CallManager, choose:
Feature > Call Pickup to configure.
From Cisco CallManager, choose:
Device > Phone and select the
directory number to assign a call
pickup group.
Call waiting Receives a second incoming call on the
same line without disconnecting the
first call
From Cisco CallManager, choose:
Device > Phone and select the
directory number to configure.