AT&T G3 Telephone User Manual


 
Issue 2 April 1996 5-5
Planning Connectivity
Communications Hardware
Communications
Hardware
Introduction The connections between the Proxy Agent and the PBX and LAN
can involve a number of different pieces of hardware, including
the following:
Modems or data modules
House wiring and cables
It is essential that AT&T certifies this hardware and that you
configure it correctly.
Gender
changers
The connections described in this book may require gender
changers. You may wish to have several gender changers on
hand when you establish the hardware connections.
Certification The configurations described in this chapter are the certified
Proxy Agent configurations supported by AT&T.
NOTE:
Other configurations can also work. However, if you use
configurations other than the ones described in this book,
and if you require assistance from the Technical Service
Organization (TSO) to make them work, the TSO will make a
"best effort" to assist you. You will be billed for that effort on a
time and materials basis.