AT&T G3 Telephone User Manual


 
Issue 2 April 1996 6-3
Connectivity
Port Terminations
Port Terminations
Introduction The termination of the connection on the PBX varies, depending
on the specific PBX.
When to use Establish the port terminations for the PBX after you have
connected the PBX and the data communications hardware.
Types of
ports
The following table shows the ports that terminate the Proxy
Agent's connection.
Definitions The types of ports are:
On DEFINITY G3r, the
system port
is an administered
resource; it is a system port because it is administered as
such. It requires a data board and pdata board.
On DEFINITY G3i, the
netcon
is an internal channel that
can be assigned as a port.
Use the add data-module command to assign the
netcon to an extension.
Use the add hunt-group command to add the
netcon extension as a member of a hunt group.
If you have this
PBX …
Then the Proxy Agent connection
terminates in a …
DEFINITY G3r system port
DEFINITY G3i netcon port