Filter
Top Products
Issue 2 April 1996 6-13
Connectivity
To Program PBX Ports
Procedure 3:
Voice and
data
Use the following steps to program a 7400B data module that
carries voice and data. You may have to use modem pooling.
Step Action
1 Enter the following command:
add station
2 Enter an analog station type in the Type field.
Example: 7101
3 Enter the analog port location in the Port field.
End
Step Action
1 Enter the following command:
add station
2 Complete the following fields.
At this field … Enter this …
Type A digital station that supports a
data module.
Example: 7407D
Port The digital port location
Data module y
Data Ext The data module extension
End