Filter
Top Products
5-28 Issue 2 April 1996
Planning Connectivity
Cables and Connectors
Step Action
1 Is the connector on the first serial port of the PC a
9-pin connector?
■ If yes, go to step 3.
■ If no, go to step 2.
Hint: PC ports are labeled with the port number and
type (serial or parallel).
2 Is the connector on the first serial port of the PC a
25-pin connector?
■ If yes, connect the female end of the RS232 cable
to the male connector of the PC's serial port.
■ If no, go to step 3.
3 On the modem or data module, connect the male end
of the RS232 cable to the female 25-pin RS232
connector.
On an ADU, connect the cable-end you configured to
the ADU.
4 Go to To Validate Dial Strings.