Filter
Top Products
Issue 2 April 1996 10-9
Alarms
Set Modem Options for Alarm Reception
Set Modem Options for
Alarm Reception
Introduction This section describes how to set options for each of the following
modems certified for alarm reception:
■ AT&T 3715 modem
■ AT&T 2224CEO modem
Procedure 1:
3715 modem
Start at the UNIX prompt.
Step Action
1 Use a UNIX editor to open the following file:
etc/uucp/Devices
2 Add (or edit) the following line:
ACU term/a01m, - 1200 direct_modem
3 Write and quit the file.
4 Enter the following command:
cu -1 /dev/ttya01m
5 Enter the following to connect to the modem:
at
Result: The modem responds with an OK prompt
6 Enter the following modem option:
ATB0Q2&C1&R0\N1\Q0%B1200&C0S78=1&W0&Y0
Result: The modem responds with an OK prompt.