Filter
Top Products
Issue 2 April 1996 9-21
Proxy Agent Administration
To Connect to a PBX
Te s ti n g
connections
Test the Proxy Agent software setup by connecting to each PBX.
3Press Ctrl-e to save your work.
Result: The message line displays the time allotted for
the first attempt to connect. If the switch is available,
you usually see the login/password window in the first
few seconds. If you have an existing connection, the
Proxy Agent asks if you would like to disconnect from
the old connection.
Hint: You can abort the countdown by pressing
Ctrl-x.
4 Enter the switch login and password.
Result: If you logged in successfully, the Main Menu
displays; otherwise, an error message or the system
prompt displays.
Notice that the menu shows you the:
■ Connected To system ID on the lower right
■ Active ID system ID on the upper right
The exit instructions are above the message line.
5 Save the switch login and password.
Step Action
End