Filter
Top Products
Issue 2 April 1996 6-11
Connectivity
To Program PBX Ports
To Program PBX Ports
When to use Program the ports for the DEFINITY G3r and G3i PBXs after you
have established the port terminations.
Guidelines Use the following guidelines when you program ports:
■ On DEFINITY G3r, the system port requires a data board
and pdata board.
■ On DEFINITY G3i, use the following commands:
Procedural
overview
Use the following procedures to program DEFINITY G3i and G3r
PBXs for compatibility with the Proxy Agent:
■ Procedure 1: System ports
■ Procedure 2: Analog line with modem
■ Procedure 3: Voice and data
■ Procedure 4: Data-only data module and ADU
Use this
command ... To do this ...
add data-module Assign the type netcon to an
extension
add hunt-group Add the netcon extension as a
member of a hunt group