Filter
Top Products
Issue 2 April 1996 3-11
UnixWare Installation
To Set System and Node Names
The node name and the system name are the same for a Proxy
Agent installation.
Procedure Use the following steps to set the system and node names.
Step Action
1 Enter the following command at the UNIX prompt:
uname -sn
Result: The system displays the system and node
names.
Example: agent2 agent2
2 Do the names on your screen match both each other
and the system name on the PA001 form?
■ If yes, you have completed this procedure.
■ If no, go to step 3.
3 Enter the following command at the UNIX prompt.
Make sure that the system name and the node name
match the system name on the PA001 form exactly.
setuname -s [system name] -n [node name]
Example: setuname -s agent2 -n agent2
End