Filter
Top Products
Chapter 6 Broadband
VMG5313-B10A/-B30A Series User’s Guide
82
Figure 16 IPv6 Rapid Deployment
Dual Stack Lite
Use Dual Stack Lite when local network computers use IPv4 and the ISP has an IPv6 network.
When the VMG has an IPv6 WAN address and you set IPv6/IPv4 Mode to IPv6 Only, you can
enable Dual Stack Lite to use IPv4 computers and services.
The VMG tunnels IPv4 packets inside IPv6 encapsulation packets to the ISP’s Address Family
Transition Router (AFTR in the graphic) to connect to the IPv4 Internet. The local network can also
use IPv6 services. The VMG uses it’s configured IPv6 WAN IP to route IPv6 traffic to the IPv6
Internet.
Figure 17 Dual Stack Lite
6.1.3 Before You Begin
You need to know your Internet access settings such as encapsulation and WAN IP address. Get this
information from your ISP.
ISP (IPv4)
IPv6 Internet
IPv4
IPv6
BR
IPv6 in IPv4
IPv4 Internet
IPv4
+
LAN
- IPv6
- IPv4
WAN
- IPv4
- IPv6 in IPv4
ISP (IPv6)
IPv6 Internet
IPv6
AFTR
IPv4 in IPv6
IPv4 Internet
IPv6
IPv4
+
LAN
- IPv6
- IPv4
WAN
- IPv6
- IPv4 in IPv6