Filter
Top Products
Chapter 23 Voice
VMG5313-B10A/-B30A Series User’s Guide
273
• The dot “.” appended to a digit allows the digit to be ignored or repeated multiple times. Any digit
(0~9, *, #) after the dot will be ignored.
For example, (01.) means a number matching this rule can be 0, 01, 0111, 01111, and so on.
• <dialed-number:translated-number> indicates the number after the colon replaces the number
before the colon in an angle bracket <>. For example,
(<:1212> xxxxxxx) means the VMG automatically prefixes the translated-number “1212” to the
number you dialed before making the call. This can be used for local calls in the US.
(<9:> xxx xxxxxxx) means the VMG automatically removes the specified prefix “9” from the
number you dialed before making the call. This is always used for making outside calls from an
office.
(xx<123:456>xxxx) means the VMG automatically translates “123” to “456” in the number you
dialed before making the call.
• Calls with a number followed by the exclamation mark “!” will be dropped.
• Calls with a number followed by the termination character “@” will be made immediately. Any
digit (0~9, *, #) after the @ character will be ignored.
In this example dial plan (0 | [49]11 | 1 [2-9]xx xxxxxxx | 1 947 xxxxxxx !), you can dial “0” to call
the local operator, call 411 or 911, or make a long distance call with an area code starting from 2 to
9 in the US. The calls with the area code 947 will be dropped.
Use the SIP Service Provider Add/Edit screen to configure a SIP service provider on the VMG. Click
the Add new provider button or an Edit icon in the VoIP > SIP > SIP Service Provider to open
the following screen.
Note: Click more to see all the fields in the screen. You don’t necessarily need to use all
these fields to set up your account. Click less to see and configure only the fields
needed for this feature.