Filter
Top Products
Chapter 1 Introducing the VMG
VMG5313-B10A/-B30A Series User’s Guide
22
1.8 Wireless Access
The VMG is a wireless Access Point (AP) for wireless clients, such as notebook computers or PDAs
and iPads. It allows them to connect to the Internet without having to rely on inconvenient Ethernet
cables.
You can configure your wireless network in either the built-in Web Configurator, or using the WPS
button.
Figure 3 Wireless Access Example
1.8.1 Using the Wi-Fi and WPS Buttons
If the wireless network is turned off, press the Wi-Fi button for one second. Once the WiFi LED
turns green, the wireless network is active.
You can also use the WPS button to quickly set up a secure wireless connection between the VMG
and a WPS-compatible client by adding one device at a time.
To activate WPS:
1 Make sure the PWR/SYS LED is on and not blinking.
2 Press the WPS button for five seconds and release it.
3 Press the WPS button on another WPS-enabled device within range of the VMG. The WiFi LED
flashes orange while the VMG sets up a WPS connection with the other wireless device.
4 Once the connection is successfully made, the WiFi LED shines green.
To turn off the wireless network, press the Wi-Fi button for one to five seconds. The WiFi LED
turns off when the wireless network is off.