Filter
Top Products
Chapter 8 Home Networking
VMG5313-B10A/-B30A Series User’s Guide
146
The following table describes the labels in this screen.
8.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 140 for more information on UPnP.
Use the following screen to configure the UPnP settings on your VMG. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Figure 52 Network Setting > Home Networking > UPnP
Table 32 Static DHCP: Add/Edit
LABEL DESCRIPTION
Active Select this to activate the connection between the client and the VMG.
Group Name Select the interface group name for which you want to configure static DHCP settings.
See Chapter 14 on page 205 for how to create a new interface group.
Select Device Info Select a device or computer from the drop-down list or select Manual Input to manually
enter a device’s MAC address and IP address in the following fields.
MAC Address If you select Manual Input, enter the MAC address of a computer on your LAN.
IP Address If you select Manual Input, enter the IP address that you want to assign to the
computer on your LAN with the MAC address that you will also specify.
Apply
Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.