Filter
Top Products
Chapter 4 Tutorials
VMG5313-B10A/-B30A Series User’s Guide
37
4 Next, go to Broadband > Ethernet WAN, select Enable and then click Apply.
5 After the connection is set up, connect LAN port 4 to a broadband router or modem for Internet
access.
Note: The DSL Internet connection and the Ethernet Internet connection cannot operate
at the same time.
4.3 Setting Up an ADSL PPPoE Connection
This tutorial shows you how to set up an ADSL Internet connection using the Web Configurator.
If you connect to the Internet through an ADSL connection, use the information from your Internet
Service Provider (ISP) to configure the VMG. Be sure to contact your service provider for any
information you need to configure the Broadband screens.
1 Click Network Setting > Broadband to open the following screen. Click Add New WAN
Interface.