Filter
Top Products
Chapter 6 Broadband
VMG5313-B10A/-B30A Series User’s Guide
100
It’s not enough to just enable LAN 4 as a WAN connection here. You must also go to Network
Setting > Broadband > Add New WAN Interface screen and create a new interface for it with
the Type as Ethernet and Encapsulation as IPoE, and it’s advisable to enable NAT.
You cannot have DSL Ethernet and 3G WAN connections working at the same time. The order of
priority for the WAN connections are:
1 DSL
2 Ethernet
3 3G
Click Network Setting > Broadband > Ethernet WAN to display the following screen.
Figure 26 Network Setting > Broadband > Ethernet WAN
The following table describes the fields in the above screen.
6.7 Technical Reference
The following section contains additional technical information about the VMG features described in
this chapter.
Encapsulation
Be sure to use the encapsulation method required by your ISP. The VMG can work in bridge mode
or routing mode. When the VMG is in routing mode, it supports the following methods.
Table 15 Network Setting > Broadband > Ethernet WAN
LABEL DESCRIPTION
Enable Click the radio button to convert LAN port number four to a WAN port.
Disable Click the radio button to restore LAN port number four to a LAN port.