Filter
Top Products
Chapter 23 Voice
VMG5313-B10A/-B30A Series User’s Guide
267
to enable and configure a SIP account, and map it to a phone port. The SIP account contains
information that allows your VMG to connect to your VoIP service provider.
See Section 23.3.1 on page 267 for how to map a SIP account to a phone port.
Use this screen to view SIP account information. You can also enable and disable each SIP account.
To access this screen, click VoIP > SIP > SIP Account.
Figure 137 VoIP > SIP > SIP Account
Each field is described in the following table.
23.3.1 The SIP Account Add/Edit Screen
Use this screen to configure a SIP account and map it to a phone port. To access this screen, click
the Add new account button or click the Edit icon of an entry in the VoIP > SIP > SIP Account
screen.
Note: Click more to see all the fields in the screen. You don’t necessarily need to use all
these fields to set up your account. Click less to see and configure only the fields
needed for this feature.
Table 108 VoIP > SIP > SIP Account
LABEL DESCRIPTION
Add new account Click this to configure a SIP account.
# This is the index number of the entry.
Active This shows whether the SIP account is activated or not.
A yellow bulb signifies that this SIP account is activated. A gray bulb signifies that this SIP
account is not activated.
SIP Account
This shows the name of the SIP account.
Service Provider This shows the name of the SIP service provider.
Account No. This shows the SIP number.
Modify Click the Edit icon to configure the SIP account.
Click the Delete icon to delete this SIP account from the VMG.