Filter
Top Products
Chapter 7 Wireless
VMG5313-B10A/-B30A Series User’s Guide
122
7.7.1 WDS Scan
You can click the Scan icon in Wireless > WDS to have the VMG automatically search and display
the available APs within range. Select an AP and click Apply to have the VMG establish a wireless
link with the selected wireless device.
Figure 38 WDS: Scan
The following table describes the labels in this screen.
7.8 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
See Section 7.10.2 on page 127 for detailed definitions of the terms listed in this screen.
Table 26 WDS: Scan
LABEL DESCRIPTION
Wireless Bridge Scan Setup
Refresh Click Refresh to update the table.
# This is the index number of the entry.
SSID This shows the SSID of the available wireless device within range.
BSSID This shows the MAC address of the available wireless device within range.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.