Filter
Top Products
Chapter 8 Home Networking
VMG5313-B10A/-B30A Series User’s Guide
151
Click Network Setting > Home Networking > Wake on Lan to open this screen.
Figure 55 Network Setting > Home Networking > Wake on Lan
The following table describes the labels in this screen.
8.8 The TFTP Server Name Screen
Use the TFTP Server screen to identify a TFTP server for configuration file download using DHCP
option 66. RFC 2132 defines the option 66 open standard. DHCP option 66 supports the IP address
or the hostname of a single TFTP server.
Click Network Setting > Home Networking > TFTP Server Name to open this screen.
Figure 56 Network Setting > Home Networking > TFTP Server Name
Table 36 Network Setting > Home Networking > Wake on Lan
LABEL DESCRIPTION
Wake by
Address
Select Manual and enter the IP address or MAC address of the device to turn it on remotely.
The drop-down list also lists the IP addresses that can be found in the VMG’s ARP table.
Select an IP address and it will then automatically update the IP address and MAC address
in the following fields.
IP Address Enter the IPv4 IP address of the device to turn it on.
MAC Address Enter the MAC address of the device to turn it on. A MAC address consists of six
hexadecimal character pairs.
Wake up Click this to send a wake up packet to wake up the specified device.