Filter
Top Products
Chapter 19 Parental Control
VMG5313-B10A/-B30A Series User’s Guide
238
Figure 119 Parental Control Rule: Add/Edit Rule > Add Keyword
The following table describes the fields in this screen.
Table 91 Parental Control Rule: Add/Edit
LABEL DESCRIPTION
General
Active Select the checkbox to activate this parental control rule.
Parental
Control Profile
Name
Enter a descriptive name for the rule.
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select Custom, enter the LAN user’s MAC address. If you select All, the rule applies to all
LAN users.
Rule List In Home Network User, select Custom, enter the LAN user’s MAC address, then click the
+ sign to enter a computer MAC address for this PCP. Up to five are allowed. Click the - sign
to remove one.
Internet Access Schedule
Day Select check boxes for the days that you want the VMG to perform parental control.
Time Drag the time bar to define the time that the LAN user is allowed access (Authorized
access) or denied access (No access). Click the + sign above the time bar to add a new
time bar. Up to three are allowed.
Authorized
access
Select this to allow access for the times defined above.
No access Select this to deny access for the times defined above.
Network Service
Network
Service Setting
If you select Block, the VMG prohibits the users from viewing the Web sites with the URLs
listed below.
If you select Allow, the VMG blocks access to all URLs except ones listed below.
Add new
service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Name of the new rule.
# This shows the index number of the rule. Select the checkbox next to the rule to activate it.
Service Name This shows the name of the rule.
Protocol:Port This shows the protocol and the port of the rule.