Filter
Top Products
79
Caller ID
Caller ID operation
Save a caller ID entry to the directory
When in the caller ID history, press or to browse
to the number you wish to save.
Press MENU
/SELECT, then press or to choose
Copy to DIR.
Press
MENU/SELECT. The screen displays Enter
Name. Use the dialing keys to edit the name.
Press DELETE to delete a character.
Press /REPEAT or /SKIP to move the cursor to
the left or right.
Press MENU/SELECT to save. The screen displays
Enter Number. Use the dialing keys to edit
the number.
Press DELETE to delete a digit.
Press /REPEAT or /SKIP to move the cursor to
the left or right.
You can include a pause while storing a dialing sequence that requires
one during actual dialing. Press
or to choose Add pause, then press
MENU/SELECT. A P appears on the screen.
Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services.
Press
or to choose Send tone, then press MENU/SELECT. A T
appears on the screen. All numbers you enter after this will send touch-
tone signals during dialing.
You can store the flash signal required by some special services as part
of a dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. An F appears on the screen. Continue storing the number
as usual.
Press or to scroll to Done, then press MENU/SELECT. To exit without
making changes, press CANCEL, or press or to scroll to Cancel, then
press MENU/SELECT.
NOTE: You will need to change how a caller ID number is dialed if the entry does not appear
in the correct format. Caller ID numbers might appear with an area code that might not be
necessary for local calls, or without a 1 that may be necessary for long distance calls (see
View dialing options on the previous page for more information).
1.
2.
3.
•
•
4.
•
•
•
•
•
5.
Enter Number
8005959511_
Select to:
Done
8005959511
>Copy to DIR
Copy to 1-touch
Delete
NEW 001/090
L1