Filter
Top Products
93
All feature settings below apply to both central (auto attendant) and
private mailboxes.
Remote access code
Use this code to select a three-digit number to allow remote access of the
answering system from another telephone. You can change the code to any
number from 000-999. This code is 333 by default.
When the console is idle, press ANS SYS.
Press
or to scroll to Ans Sys Setup, then press
MENU/SELECT or /SKIP.
Press or to scroll to Remote Code, then press
MENU/SELECT or /SKIP.
The screen displays Remote Code. Use the dialing
keys to enter a three-digit remote code.
Press DELETE to delete a digit.
Press /REPEAT or /SKIP to move the cursor to
the left or right.
Press MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
Message date/time
The message date and time is set to Announce by
default. During message playback, you hear the date
and time the message was received. You can change
this setting to skip the date and time information.
When the console is idle, press ANS SYS.
Press or to scroll to Ans Sys Setup, then press
MENU/SELECT or /SKIP.
Press or to scroll to Msg Date/Time, then press
MENU/SELECT or /SKIP.
Press or to choose Announce or Skip.
Press MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
1.
2.
3.
4.
•
•
5.
1.
2.
3.
4.
5.
Answering system
Answering system setup
Ans Sys Setup
>Remote Code
Msg Date/Time
Message Alert
Message Length
Call Screening
Remote Code
333_
Ans Sys Setup
Remote Code
>Msg Date/Time
Message Alert
Message Length
Call Screening
Msg Date/Time
>Announce
Skip