Filter
Top Products
64
This telephone has 32 one- and two-touch memory locations (speed dial
locations) where you can store the phone numbers or system extension
numbers you wish to dial more quickly. You can store up to 30 digits in
each location.
You can access the first 16 locations using only the one-touch buttons. To
access the remaining 16 locations, press LOWER and then the one-touch
button for the desired location. You might wish to write the names, telephone
numbers, or extension numbers of the one-touch entries on the directory card,
using the light gray spaces for the upper 16 locations and the white spaces for
the lower 16 locations.
Assign a one-touch entry
Use the following steps to program the one-touch keys.
When the console is idle, press MENU/SELECT.
Press
or to scroll to One Touch, then press
MENU/SELECT or /SKIP.
Press
or to scroll to Program, then press
MENU/SELECT or /SKIP.
The screen displays Enter Number:
Use the dialing keys to enter a telephone number
(up to 30 digits) or an extension number.
Press DELETE to delete a digit.
Press /REPEAT or /SKIP to move the cursor
to the left or right.
You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press or to choose Add pause, then press
MENU/SELECT. A P appears on the screen.
Store a signal for switching to temporary tone
signaling. If you have dial pulse (rotary) service,
this signal is required for some special services.
Press
or to choose Send tone, then press
MENU/SELECT. A T appears on the screen. All
numbers you enter after this will send touch-tone
signals during dialing.
1.
2.
3.
4.
5.
•
•
•
•
Telephone operation
One touch
Ringers
Set Date/Time
>One Touch
Phone Settings
System Setup
Registration
Customer Support
One Touch
View
>Program
Enter Number:
18005959511_
Select to:
Done