Filter
Top Products
67
Telephone operation
One touch
Edit the one-touch key (continued)
Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services.
Press
or to choose Send tone, then press MENU/SELECT.
A T appears on the screen. All numbers you enter after this will send
touch-tone signals during dialing.
You can store the flash signal required by some special services as part
of a dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. An F appears on the screen. Continue storing the number
as usual.
Press or to scroll to Done, then press MENU/SELECT to save the
setting.
Delete an one-touch key
When the console is idle, press MENU/SELECT.
Press
or to scroll to One Touch, then press
MENU/SELECT or /SKIP.
Press
or to scroll to View, then press
MENU/SELECT or /SKIP.
Press or to scroll to the desired one-touch
location.
Press /SKIP to scroll to Delete, then press
MENU/SELECT. The screen displays Delete memory?
Press MENU/SELECT to confirm. To exit without making changes,
press CANCEL.
•
•
7.
1.
2.
3.
4.
5.
6.
One Touch #18
18005959511
Delete