Filter
Top Products
74
Directory
Dial, delete or edit entries
Copy a directory entry to one touch
When a directory entry appears, press MENU/SELECT.
Press
or to choose Copy to 1-touch, then press
MENU/SELECT.
The screen displays Enter Number. Use the dialing
keys to edit the number.
Press DELETE to delete a digit.
Press
/REPEAT or /SKIP to move the cursor to
the left or right.
You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press or to choose Add pause, then press
MENU/SELECT. A P appears on the screen.
Store a signal for switching to temporary tone
signaling. If you have dial pulse (rotary) service,
this signal is required for some special services.
Press or to choose Send tone, then press
MENU/SELECT. A T appears on the screen. All
numbers you enter after this will send touch-tone
signals during dialing.
You can store the flash signal required by some
special services as part of a dialing sequence.
Press or to choose Add flash, then press
MENU/SELECT.
An F appears on the screen. Continue storing the
number as usual.
Press
or to scroll to Done, then press
MENU/SELECT.
The console displays Press a 1-touch key to save
the number.
Press the one-touch button for the destination
party in the upper location.
-OR-
Press LOWER, then press the one-touch button for the destination party
in the lower location.
The console displays Number saved to 1-touch key.
1.
2.
3.
•
•
•
•
•
4.
5.
•
•
6.
Press a
1-touch key
to save the
number
Number saved
to
1-touch key
Enter Number
8005959511_
Select to:
Done
Christine Smith
Edit
>Copy to 1-touch
Delete
32/50