Filter
Top Products
94
Answering system
Answering system setup
Message alert
Use this feature to turn the audible message alert on
or off.
If the message alert tone is on, the console beeps every
30 seconds when there are new messages in the central
mailbox and/or private mailbox.
When the console is idle, press ANS SYS.
Press
or to scroll to Ans Sys Setup, then press
MENU/SELECT or /SKIP.
Press
or to scroll to Message Alert, then press
MENU/SELECT or /SKIP.
Press
or to choose On or Off.
Press MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
Message Length
Use this feature to set the maximum length of each recorded message.
If you choose Greeting only, the caller hears the selected announcement but
is not able to record a message. If you choose 1 minute, 2 minutes or
3 minutes, the caller can record a message up to that specific time period. If
you choose Unlimited, the caller can record a message of any length, up to
the remaining time for all messages and memos.
When the console is idle, press ANS SYS.
Press
or to scroll to Ans Sys Setup, then press
MENU/SELECT or /SKIP.
Press
or to scroll to Message Length, then
press MENU/SELECT or /SKIP.
Press or to choose Greeting only, 1 minute,
2 minutes, 3 minutes, or Unlimited.
Press MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Ans Sys Setup
Remote Code
Msg Date/Time
Message Alert
>Message Length
Call Screening
Message Length
>Greeting only
1 minute
2 minutes
3 minutes
Unlimited
Message Alert
>On
Off
Ans Sys Setup
Remote Code
Msg Date/Time
>Message Alert
Message Length
Call Screening