Filter
Top Products
10
Install the console close to the telephone jacks, an Ethernet wall jack (if
necessary), and a power outlet not controlled by a wall switch. The telephone
can be placed on a flat surface or vertically mounted on the wall ( pages 18- 22 ).
TIP: If you subscribe to high-speed Internet service (DSL - digital subscriber line) through
your telephone lines, you must install DSL filters between the telephone line cords and the
telephone wall jacks (see page 13 or 14 ). The filter prevents noise and caller ID problems
caused by DSL interference. Please contact your DSL service provider for more information
about DSL filters.
Your product may be shipped with a protective sticker covering the console
display - remove it before use.
For customer service or product information, visit our website at
businessphones.vtech.com or call 1 (800) 595-9511. In Canada, please dial
1 (800) 267-7377.
Avoid placing the console too close to:
Communication devices such as television sets, VCRs, or other
cordless telephones.
Excessive heat sources.
Noise sources such as a window with traffic outside, motors, microwave
ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing machine or
work bench.
•
•
•
•
•
•
•
Getting started
Installation