Filter
Top Products
58
The system can support 5-way conference with a maximum of one outside call
and four system extensions (including the initiating party), or two outside calls
and three system extensions (including the initiating party). The outside call
must be established first because an intercom call cannot be placed on hold.
There are two ways to establish a conference call.
Inviting parties using Intercom
The party who initiates the conference invites other system extensions to join
the conference by using intercom after establishing the first outside call.
-OR-
Join a call in progress
Other system extensions can join the call in progress by pressing the line key
which is currently in use for the conference to join the call.
A. Inviting parties using Intercom
Make or answer an outside call.
Press another available line key to make another outside call. The original
outside call is put on hold. When the external party picks up, you can have a
private conversation with that party.
-OR-
Press INTERCOM. The outside call is put on hold.
Press
or to scroll to the desired extension, or
enter the desired extension number directly. The
called extension picks up the intercom call. You can
now have a private conversation with that extension.
Press CONFERENCE at any time to begin the
conference call.
If necessary, repeat step 2 (Intercom method) and step 3 above to invite
another system extension to join the conference until the maximum capacity
is reached.
Place the corded handset on the console or press SPEAKER if you are
using the speakerphone to hang up. If the party who initiates the conference
call hangs up, the conference call will be ended. The call will also be ended
when all parties hang up.
NOTE: If you want to start a conference with two outside calls, make sure you have invited
two outside calls before inviting any system extensions.
A.
B.
1.
2.
3.
4.
5.
Telephone operation
Conference call
Conf. 00:00:00
L1:8005959511
L2:8002677377
L1 L2
PRIV