Filter
Top Products
Value Range 5–3600
Default Value 30
Configuration File Reference CDP_INTERVAL (Page 247)
4.3.4.4 VLAN Settings
Enable IP Phone VLAN
Description Selects whether to use the VLAN feature to perform VoIP
communication securely.
Note
• You should specify "Yes" for only one of "LLDP", "VLAN" or
"IEEE802.1X".
• If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "IEEE802.1X" >
"VLAN" > "LLDP". Therefore, if "Yes" is specified for both
"VLAN" and "LLDP", the VLAN-related settings are used.
Value Range
• Yes
• No
Default Value No
Configuration File Reference IP_PHONE_VLAN_ENABLE (Page 253)
IP Phone VLAN ID
Description Specifies the VLAN ID for this unit.
Note
• You cannot set this parameter if [Enable IEEE802.1X] is set to
[Yes].
Value Range NULL, 0–4094
Default Value 2
Configuration File Reference IP_PHONE_VLAN_ID (Page 254)
Enable PC VLAN
Description Determines whether PC VLAN is enabled or disabled.
Value Range
• Yes
• No
Default Value No
Configuration File Reference PC_VLAN_ENABLE (Page 254)
Document Version 2014-05 Administrator Guide 91
4.3.4 Ethernet Port Settings