Filter
Top Products
Value Range
• Yes
• No
Note
• If you select [Yes], the "c=0.0.0.0" syntax will be set in SDP
when sending a re-INVITE message to hold the call. If you
select [No], the "c=x.x.x.x" syntax will be set in SDP.
Default Value Yes
Configuration File Reference RFC2543_HOLD_ENABLE (Page 288)
4.5.3.7 CODEC Preferences
G722 (Enable)
Description Selects whether to enable the G.722 codec for voice data transmission.
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference CODEC_ENABLE_G722 (Page 282)
G722 (Priority)
Description Specifies the numerical order usage priority for the G.722 codec.
Value Range 1–255
Default Value 1
Configuration File Reference CODEC_PRIORITY_G722 (Page 283)
PCMA (Enable)
Description Selects whether to enable the PCMA codec for voice data transmission.
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference CODEC_ENABLE_PCMA (Page 282)
PCMA (Priority)
Description Specifies the numerical order usage priority for the PCMA codec.
Value Range 1–255
124 Administrator Guide Document Version 2014-05
4.5.3 VoIP Settings [Line 1]–[Line n]